Author |
Message
|
wormy |
Posted: Thu Sep 01, 2005 8:48 am Post subject: ESI Quatafire 610 for sale |
|
|
Joined: 16 Nov 2004 Posts: 2
|
I've only used this unit a few times and stopped using it since I got my Pro Tools system, and I'm trying to sell it. It's still in very good condition.
Another reason I'm trying to get rid of it is because it doesn't really work well on a Mac, due to the limitations set.
I bought it for RM1600, and will sell for RM1000. Price is negotiable.
I need to sell this unit before I leave for America end of September.
Interested buyers please reply to this thread and we can sort things out.
Here are the specs :
Ultimate Mobile Solution for Audio Professionals
QuataFire 610 is an ultra-compact, FireWire compatible audio/MIDI recording interface for laptop and desktop computers. QuataFire 610 offers top quality 24-bit 192 kHz output and 96 kHz input audio performance and its 6-in/10-out configuration offers great flexibility whether you’re recording, or routing discrete outputs to a mixer. QuataFire 610 features MIC/line inputs with built-in preamps and +48V phantom power, individual gain controls, headphone output with volume control, 32 channel MIDI I/O, and S/PDIF digital I/O. It also allows you to monitor your inputs through the internal digital mixer for Direct input monitoring. QuataFire 610 can be completely FireWire bus-powered for ultimate mobile applications.
FRONT PANEL: 2 combo [XLR & 1/4 inch] jacks for inputs 1&2, Mic/Line switch, Instrument (Hi-Z) switch, +48V phantom power switch, Input gain control, headphone output with headphone volume control.
REAR PANEL: RCA type connectors for analog inputs 3&4 and outputs 1-4, S/PDIF coaxial I/O, 1/4 inch jacks for analog outputs 5-8, MIDI 2 in 2 out.
QuataFire 610 works under Windows XP (Service Pack 1 is required) and Mac OS X (version 10.3.6 and higher). It integrates easily into all common professional audio applications under Windows XP and Mac OS X.
Specifications
- 4 channel analog input (24-bit/96kHz)
- 8 channel analog output (supports up to 24-bit/192kHz)
- 24-bit 96kHz 2 channel S/PDIF [coaxial] digital I/O
- 2 Mic/Inst Preamps with +48V Phantom Power
- 2 port MIDI I/O [32 MIDI channels]
- Headphone Amp with volume control
- Powered by FireWire bus or external power supply
- supports WDM, MME, CoreAudio and ASIO 2.0
- Ableton Live ESI software for PC included
- Windows XP Service Pack 1 required
- Mac OS X 10.3.6 and higher version required
- Technical Tips
- - External adaptor is needed for laptop.
- - Does not support None PCM pass thru for digital output.
- - External adaptor is needed for +48V Phantom microphone.
- Limitation on the MAC
- - Sample rate: 44.1, 48, 88.2 and 96kHz are supported, even though 176.4 and 192kHz are displayed on the AMS, these sample rates cannot be used at the moment. (NOV, 11, 2004) *176.4 & 192kHz are intend to use for monitor output only
- - 4pin IEEE1394 Port laptop users have to use external adaptor which included.
- - Some of Bass guitars can be occurred noise during recording.
- - Note 1 : Quata Fire can be used bus power basically. But you should use external adaptor which included for laptop or desktop PC which does not provide full power.
- - Note 2: IEEE1394 cable which 6-4pin does not supports power supply from 4pin connector of your PC.
- - Note 3: It does not support GSIF and DirectWire3.0
- - Note 4: You must setup on volume to more then 80% when input from some of microphone or electronic guitar for Characteristic Impedance . |
|
Back to top |
|
|
denhock |
Posted: Thu Sep 01, 2005 6:49 pm Post subject: |
|
|
Joined: 30 Mar 2005 Posts: 551 Location: Low Yat Plaza, Kuala Lumpur
|
|
Back to top |
|
|
|
|