Joined: 30 Aug 2006
Posts: 416
|
YUSRY: Salam , your TS mic sound memang bagus but why use kotak putih for packing. Lagi satu you pakai print logo tak nampak menarik la…next model kasi cun sikit boleh? Lagi satu, serial no. pun takde…apa ni…nak jual mic tapi macam main2 je.
MY-MIC: Hi Yusry, we appreciate your comments. From now on every new model will use ALUMINIUM BRIEFCASE macam secret agent. Regarding logo printing, we will ENGRAVE all logos and model name. Oh yes, this time all models will come with engraved serial numbers.
ADIK: Aloooo, apa beza TS V2 dengan TS? Upgrade betul ke ni? Atau pun just gimmick?
MY-MIC: Hi Adik, to answer your questions see below:
1. Capsule size 35mm instead of 32mm. Helps to reproduce a colorful spectrum of frequencies.
2. Design is going to blow your mind. Wait and see. It’s bigger and heavier and longer. Much longer.
3. Shockmount is a new design, it's big and it screws on to the microphone body.
4. Comes with 2 switches outside the body, 1 for low cut and 1 for PAD
5. Sensitivity has been improved and it’s even hotter now.
6. Custom Sound Signature Series by MY-MIC on all our new microphone models on the PCB board we have our company name MY-MIC and mic model printed to ensure 100% original sound quality like no other mic in the World. Unique and special only from MY-MIC.
7. Comes with our custom made Aluminium Briefcase to protect your valuable TS V2 and maintain a professional look at the same time.
8. Engraved logo and mic model with serial no. to give it a final and professional finishing to compete with other branded mics.
DAVID: Ayo macha! Itu butang low cut banyak susah ohhhh. Mau bukak housing lagi. problem la ni macam.
MY-MIC: Hi David, thank you for your comment regarding the low cut switch. Rest assured that our brand new TS V2 model will come with a switch outside the body plus we are adding another PAD switch to make it even more flexible.
JULIA: You got TUBE mic? What’s special with it? Got any other mic?
MY-MIC: Hi Julia, yes our TUBE mic is called TST. We use a 35mm capsule and it has our custom sound signature series. The design is so out of this world plus with the tube circuits we have been able to achieve a sensational sensitivity of -29 dB. Other high end microphones such as NEUMANN, AKG have -33dB so you get the picture. FYI we are going to give a spare TUBE for every TST mic in the package. So don’t worry, after 2000 hours you can replace it with the spare TUBE, it’s so simple. Unscrew the body then you find 2 screws holding the TUBE socket. Unscrew them and pull out the old TUBE from the socket, then insert the spare TUBE.
For your other question, we have never been more proud before with the birth of TSR. It is our 1st attempt to reproduce a classic RIBBON mic for modern day use and musical styles. The problem with conventional RIBBON mics is that they are not sensitive enough. Goodbye old technology, we have made it into an ACTIVE Ribbon mic By using a standard phantom power like a condenser mic we are proud to say that we have achieved another sensational sensitivity of -35dB for our TSR. It also comes with our custom sound signature series to ensure 100% MY-MIC sound quality. Nothing sounds more natural than our TSR. The design will maintain a vintage classic look but with a modern day sound.
Thank you for reading and keep sending us comments and suggestions to help us improve on our future products.
MY-MIC Team |
|
