| Author |
Message
|
| IZZI |
 Posted: Sat Nov 04, 2006 4:35 pm Post subject: |
 |
|
Joined: 11 Dec 2004
Posts: 3447
Location: Melbourne, Australia
|
aku nak tambah point ridzi tu: h) high gain (too high)..
analog pedal pun akan ada noise kalau pulas knob gain/drive tu sampai habis. Utk recording, menggunakan high gain setting biasanya tak memberikan result yang bagus.. lack of note clarity and detail, less punch, fizzy dan tak tight. Ko cuma perlukan moderate gain tetapi boleh direcord beberapa track.
_________________
Gelanggang guitar : http://guitarden.starahead.com |
|
| Back to top |
|
 |
| yusof |
| Posted: Sat Nov 04, 2006 4:38 pm Post subject: |
|
|
Joined: 14 Mar 2006
Posts: 152
|
hey blehbleh! when i say "u da SHIT man!" this means you are damn cool!
cakap orang negro la!
using your podXT for dry signal?why?
noise from amplitude?what kind of noise? pls describe thanks
good luck! |
|
| Back to top |
|
|
| Ridzi |
| Posted: Sat Nov 04, 2006 6:47 pm Post subject: |
|
|
Joined: 06 Feb 2004
Posts: 2198
Location: Kuala Lumpur, Malaysia
|
Hmmnn..yes dengar cakap Izzi tu  really can't deal with the sensitive types... I tell it like it is.
 |
|
| Back to top |
|
|
| danger3s |
| Posted: Sun Nov 05, 2006 8:54 pm Post subject: |
|
|
Joined: 30 Oct 2006
Posts: 267
Location: Kuantan
|
Hi
Thank you on your advice with the gain settings. I normally never went higher than 50%, frequently at 30%, then do multitracking for any part that i need more huge wall of tight sounds. Yes 30% is quite weak and obviously not up to the par for metal or heavy rock songs, but if you're dealing with POD then you just have to learn it the hard way.
I did the same on amplitube, 30% produces that same noise i heard in higher gain settings, even the clean sounds are pretty useless.
I suspect my problem to be from the crack itself, since i'm not hearing any problem from any of you.
Do you recall that AmplituBe's demo has this "building of noise" after the trial ends? Im afraid thats the noise im dealing with.
ah well, i'll just try download another one.
okla ridzi
acik x kesah la ekau nak cakap taik ko kuman ko itu ekau punyo pasal. acik datang sini nak carik membe bukan nak gado, almaklumla acik dah tuo sunyi duk umah sorang2. kok kalo ekau bosan2 tu datangle ketuk pintu rumah acik ye kite jammin lagu zapin pak malau. calos |
|
| Back to top |
|
|
| okta |
| Posted: Sun Nov 05, 2006 9:14 pm Post subject: |
|
|
Mod Squad
Joined: 11 Apr 2004
Posts: 1139
Location: Taiping
|
| blehbleh wrote: |
okla ridzi
acik x kesah la ekau nak cakap taik ko kuman ko itu ekau punyo pasal. acik datang sini nak carik membe bukan nak gado, almaklumla acik dah tuo sunyi duk umah sorang2. kok kalo ekau bosan2 tu datangle ketuk pintu rumah acik ye kite jammin lagu zapin pak malau. calos |
Anyway, you could check the stuff ridzi mention.
and..
How are you connecting to Amplitube>?
What audio interface?
that could clear things up a bit.
You can try to add a gate b4 going in Amplitube.
If you still think it's the version you have is causing the noise, please do Ik multimedia a favour. Buy it. |
|
| Back to top |
|
|
| IZZI |
| Posted: Mon Nov 06, 2006 12:00 am Post subject: |
|
|
Joined: 11 Dec 2004
Posts: 3447
Location: Melbourne, Australia
|
i suspect that the noise probably due to double clipping.. the signal 1stly clips in the POD then goes through another clipping stage in amplitube.. even if you use clean setting of the POD, the signal acctually has been moduled to be some kind of clean sound. Its not really a 'clean' sound in term of the signal..
Try to remove the POD from the chain and see how the sound goes..
p/s: masa record tu, pastikan turn of pc monitor tu.. lebih2 lagi kalau pakai single coil.. Kalau dpt bg tau info about your guitar lagi bagus sebab apa yg ridzi ckp tu ada benarnya.. microphonic pickup, bad cables or even power supply(adapter) can cause serious noise problem.
_________________
Gelanggang guitar : http://guitarden.starahead.com |
|
| Back to top |
|
|
| danger3s |
| Posted: Mon Nov 06, 2006 1:35 am Post subject: |
|
|
Joined: 30 Oct 2006
Posts: 267
Location: Kuantan
|
hello izzi hello okta
POD has this option in its software where you can choose to record only 'dry' guitar, not amplified, nothing in the chain whatsoever.
I have also tried using tascam us-122 with same result  Please note that this particular audio interface is powered by USB, so no adapter. Worth to mention that my laptop's power supply were also turned off during recording
For guitars i use an indie tribal with its stock pups and a cheap tokai ls48. Guitar cables if I can recall are probably van damme's and some from planet waves.
I'm not sure about this but pros were using their lcd screens in the studio to solve the problems they had with the pc monitors. Correct me? As far as that goes, I usually just shut my laptop's screen off during recording.
okta we're cheap so ik multimedia wont have a penny from us hehe. Just kidding. I think everyone's familiar with the H20's "Try Before Buy" right?
I'll have another shot when finished downloading the new one. Maybe I can post some of the clips with the current one if anyone needs to hear whats the noise I'm talking about
Really appreciate inputs from all of you  Thanks! |
|
| Back to top |
|
|
| okta |
| Posted: Mon Nov 06, 2006 1:43 am Post subject: |
|
|
Mod Squad
Joined: 11 Apr 2004
Posts: 1139
Location: Taiping
|
|
| Back to top |
|
|
| IZZI |
| Posted: Mon Nov 06, 2006 9:51 am Post subject: |
|
|
Joined: 11 Dec 2004
Posts: 3447
Location: Melbourne, Australia
|
bro.. aku rasa kalau guna lcd monitor tak perlu tutup la.. hanya CRT monitor jer..
all the best bro, post sound clip nanti bila dah siap..
aku pun pakai H2O punya tp ok jer takde noise walaupun aku pakai strat dgn single coil..
_________________
Gelanggang guitar : http://guitarden.starahead.com |
|
| Back to top |
|
|
| danger3s |
| Posted: Tue Nov 07, 2006 11:36 am Post subject: |
|
|
Joined: 30 Oct 2006
Posts: 267
Location: Kuantan
|
Issues SOLVED! 
Obviously the previous one has some bugs or whatever.
The new one is a lot better. I'm playing around with it right now.
Anyways, do you usually use different settings/presets of amplitube on each track? i find that using more than one would slow down(amazingly slow) my computer. More than that would just crash cubase. Quite useless if I can only use one at a time don't it?
Tell me how you're doing.
Thanks everyone! |
|
| Back to top |
|
|
| IZZI |
| Posted: Tue Nov 07, 2006 12:03 pm Post subject: |
|
|
Joined: 11 Dec 2004
Posts: 3447
Location: Melbourne, Australia
|
i used to have 5 tracks simulataneusly run with amplitube. 4 tracks for rif (recorded twice with 2 different presets, each track was duplicated and panned, so i got 2 tracks panned left and another 2 tracks panned right), another one was the guitar solo track with another aplitube preset.
and i didnt have any latency problem.. bro, what soundcard do you use?
_________________
Gelanggang guitar : http://guitarden.starahead.com |
|
| Back to top |
|
|
| GryMlock |
| Posted: Tue Nov 07, 2006 12:06 pm Post subject: |
|
|
Joined: 24 Nov 2003
Posts: 3699
Location: Agombak Ago go!
|
memang amplitube ni consume a lot of CPU resources. itu hari aku dah kusut kepala nengok apahal la CPU meter aku naik tinggi gila. rupanya pasal amplitube.
but I normally can get 4-5 amplitube running on my PC at the same time(2.8Ghz with 1GB RAM), tapi ni pun kalau aku tak banyak guna plugin lain and kena adjas buffer skit ah.
_________________
[ Kluk Kluk Adventure ] | [ Call the Paramedics ] | [ Dot ] | [ AJEEPEK ] |
|
| Back to top |
|
|
| danger3s |
| Posted: Tue Nov 07, 2006 1:07 pm Post subject: |
|
|
Joined: 30 Oct 2006
Posts: 267
Location: Kuantan
|
Must be my computer.
I run on a laptop, a student like me needs mobility so can't do much with that. Nak bli pc baru kang makan daun plak
current specs are;
1.73Ghz, 512RAM, 80GB hdd (40+40)
I used a lot of vst's in the past on multitracks but amplitube seriously cekik darah as hell, even sampletank n dfh tak camni.
oh btw both POD and tascam us-122 can be as soundcard, either one is reliable enough. POD=guitar +bass , Tascam= everything else
Anyway, solved it dengan care export the track into .wav file then import masuk balik. I can see this will work for me |
|
| Back to top |
|
|
| soundfreak22nd |
| Posted: Fri Nov 10, 2006 11:37 am Post subject: |
|
|
Joined: 04 Jul 2006
Posts: 216
|
hello,
sape ade installer untok software gita ni? like guitar rig or amplitude(tu je yg aku tau.. hihihi) 
baru nak blaja ngan software2 ni..
if u guys dont mind, email me at hafiz_22nd@yahoo.com.. |
|
| Back to top |
|
|
| kopisecheywan |
| Posted: Fri Nov 10, 2006 4:01 pm Post subject: |
|
|
Joined: 17 Oct 2006
Posts: 129
|
donlod?
_________________
so you want to be somene else?
So who the hell wants to be you?
be urself.
It's much easier |
|
| Back to top |
|
|
|
|
